diy aquaponics grow media | Building an 800 Gallon Tank

diy aquaponics grow media

I learned that deck screws are not strong enough to hold the bottom plate. I ended up using 5/16 galvanized lag bolts.
Folding the liner is a lot harder than it looks. Heres a link that may help
 http://www.friendlyaquaponics.com/support/trough-videos/

Building an 800 Gallon Tank

Rigid Insulation was laid down first

Lessons learned.  This tank lasted about 2 years.  First mistake was not wrapping the liner down over the outside.  Spilled water got between the liner and the wood.  The sides rotted out.

There were many times I forgot to turn the water off while filling the tank.  I flooded my shop several times and the moisture under the tank rotted the tank.   If you build a wood tank take every precaution to keep the wood dry.

Do you find information about diy aquaponics grow media are you looking for? If not, below may help you find more information about the diy aquaponics grow media. Thank you for visiting, have a great day.

Related Posts by Categories