diy aquaponics for beginners
I just cycled a new 40 gallon aquarium with a 10 gallon wet/dry sump tank in four days by using water and media from my aquaponic system.
Day 1 Ammonia = 0.50 Nitrite = 2.0
Day 2 Ammonia = 0.25 Nitrite = 2.0 (added more urea)
Day 3 Ammonia = 0.00 Nitrite = 5.0 (this is the Nitrite spike) (added more urea)
Day 4 Ammonia = 0.00 Nitrite = 0.0 (Wow, Ive never had it happen so fast)
The water was kept at 75F.
Inoculating with good strong culture from an established system will greatly speed up the time it takes to cycle a new system. This time the aquarium was filled with water from the aquaponic system, and I used a small activated carbon filter about 4" x 6" that I had been using to disperse the water with as it poured into the aquaponic grow bed to inoculate the aquarium..
I have also notice that a wet/dry sump is especially helpful compared to a letting the water flow through all of the media.
Its not real pretty, but this is my bio filter. I used a couple baskets filled with new Hydroton, you can see it is still floating. One basket is submerged while the other is above the water level (wet/dry sump).
My aquaponic system uses ebb and flow, but Ive seen better results when I duplicate a wet/dry sump by not completely draining the grow bed.
.
Do you find information about diy aquaponics for beginners are you looking for? If not, below may help you find more information about the diy aquaponics for beginners. Thank you for visiting, have a great day.
0 komentar:
Posting Komentar